Routine upkeep of the glove box

Etelux reminds you that in addition to the normal inspection of the glove box, the daily upkeep operate of the glovebox is also necessary

1. Ahead of and right after each work, first cleanse the atmosphere to make the ground dry and clear. Then clear the equipment, including the inner and outer surfaces of the glove box, the observation system, the function surface, and so forth., to be free of debris and clear.

two. Carefully document Protector Fiberglass Controlled Atmosphere Glove Box, , oxygen material, and fuel use of the products in the glove box each and every day to steer clear of inadequate fuel strain and cause the equipment to cease managing.

3. Shell out interest to the quantity of fuel in the functioning fuel cylinder at any time and exchange it in time.

4. In situation of power failure, push the “vacuum pump” button on the panel to make the vacuum pump run after electrical power on.



5. Be aware: After power on, if there is a problem that it can not start off, the chance is that the vacuum pump electrical power cable is loosely linked. Protector Fiberglass Controlled Atmosphere Glove Box, is that the vacuum pump’s own switch is not turned on.

six. When you want to place the sample into the glove box, use a little transition chamber as much as possible. Ahead of opening the transition door, spend focus to whether the strain gauge pointer on the valve cavity is at the zero position. If it is, you can open up it straight if not, you want to flip the switch below the valve cavity to the “filling” position to enable the fuel enter the glove box transition compartment, and then flip the swap back to the intermediate place, then you can open the changeover compartment Put the sample in the doorway, and then near the doorway. When putting samples, be watchful not to touch the inner wall of the changeover chamber with your arms, put on gloves to select and area the samples.

Undertaking these schedule maintenance duties can decrease the reduction charge of the glove box, prolong the support existence of the glove box, and also decrease the incidence of incidents